POWDER GRANULATION EQUIPMENTS

TRAY DRYER MACHINE


















OSCILLATING GRANULATOR MACHINE






















FLUID BED DRYER MACHINE




























RAPID MIXER GRANULATOR MACHINE

















OCTAGONAL BLENDER MACHINE




























DOUBLE CONE BLENDER MACHINE
























MASS MIXER MACHINE
























MULTI MILL MACHINE























VIBRO SIFTER MACHINE

Process Equipments

POWDER GRANULATION EQUIPMENTS

Process Equipments

SYRUP MANUFACTURING PLANT

Process Equipments

OINTMENT / LOTION / CREAM MANUFACTURING PLANT

Process Equipments

LIQUID MANUFACTURING PLANT

Pharmaceutical Machinery

LIQUID MANUFACTURING PLANT
OINTMENT / LOTION / CREAM MANUFACTURING PLANT
SYRUP MANUFACTURING PLANT
POWDER GRANULATION EQUIPMENTS
LIQUID INJECTABLE EQUIPMENTS
TABLET / CAPSULE PACKING EQUIPMENTS
POWDER AND GRANULE PACKING EQUIPMENTS
POWDER INJECTABLE EQUIPMENTS
LIQUID PACKAGING EQUIPMENTS

AUTOMATIC AMPOULE FILLING & SILLING MACHINE

MODEL NO: CPAFS
AUTOMATIC AMPOULE FILLING & SILLING MACHINE

OPERATION:
The sterilized ampoule tray can be directly loaded in to slant hopper of the unit. The synchronized star wheel Delivers ampoules, one by one on moving eccentric ampoule rack in single or two’s or four’s. During the stoppage of rack sequentially pre-gassing Filling, post gassing, pre heating (for single and double head only) and final Sealing/annealing is achieved. At the end to the rack, optional synchronized pusher Pushes out ampoules in to tray in vertical position.

The basic unit fitted with parts suitable for any size of Ampoule and any one fill size syringes. In the event of change over of each size of Ampoule, following change parts are required.

The filling system includes filling syringes, made from stainless steel, pre & post gassing arrangements as well as mechanical “No Ampoule, No Filling” device. Filling is affected by aspirating filling product through the syringes, passing it by positive displacement through the non return valves, filling tubes and filling needles in to the ampoules. Fine setting of each filing syringe is possible. The machine is suitable for filling range from 1 ml to 20 ml. “No ampoule, No filling” system is advantageous to save the costly filling liquid.

The sealing station is composed of the ampoule revolving station, sealing burners as well as draw-off jaws. The regulations of burner flames are made easier with the knob.

The machine can be easily inspected and better accessed from the both the sides. The driving and controlling elements are protected from splinters, product spillage and jets of water. All the parts coming in contact with the filling liquid are made out of stainless steel 316 and can easily be cleaned and sterilized.

The ampoules which are to be treated are fed from ampoule sterilization boxes to an inclined charging hopper. Alternatively, customer can make arrangement for feeding the ampoules directly from sterilized tunnel. Through the charging hopper the ampoules are passed in to ampoule feeding Wheel, which in turn transfers the ampoules positively to the ampoule carrying rack.

Ampoules at a time are transported to the various processing stations. The ampoule carrying rack carries the ampoules at an angle of 52 degrees to the vertical, stroke wise. Two centering racks lift the ampoules from behind out of ampoule carrying rack for inert gas treatment and filling and sealing operation. The precision transport system ensures exact centering of ampoule necks at each working station.

At the filling station, ampoules are filled accurately, at a time depending on no. of syringes. Filling is affected by aspirating filling product through the syringes, passing it by positive displacement through the non return valves, filling tubes and filling needles, in to the ampoules. Filling in the stationery position and exact centering of necks at the filling and gassing stations guarantees filling without moistening ampoules necks and uniform, safe closures.

The sealing station is composed of the ampoule revolving station, burner station as well as draw off jaws. In the ampoule revolving station, the ampoules are rotated round its longitudinal axis. At sealing station, the ampoule necks are gripped by the draw off jaws and sealed when adequate plasticity of glass has been reached, the glass splinters are collected in the waste box.

AUTOMATIC SELF ADHESIVE LABELLING MACHINE

MODEL NO. CPASL
AUTOMATIC SELF ADHESIVE LABELLING MACHINE

OPERATION:
The round containers positioned & accurate spacing between two containers by the roller spacing device for wrap-around operation at the operation at the labeling point, an electronic product sensor container & release a label from self adhesive label roll. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.

PRE FILLED SYRINGE FILLING AND STOPPERING MACHINE

MODEL NO.: CPPFS
PRE FILLED SYRINGE FILLING AND STOPPERING MACHINE

Monoblock pre Filled Syringe filling and Stoppering machine Model - CPPFS is very compact and elegant PLC based GMP model for automatic filling and Stoppering operation of pre filled syringe.

OPERATION

Operator has to keep a nest (tray) of 100 pre filled syringes over the SS jig. Then he has to put a jig to filling magazine and start the machine to filled syringes.

Operator has to keep a nest (tray) of 100 pre-filled syringes over the SS jig. Then he has to put a plugs tray with suitable stoppers over the SS-316 plug tray. Then after he has to close the evacuation and Stoppering chamber. Now he can start the machine.Automatic Filling cycle start one by one as per the programmed Stoppering cycle mentioned as under. 100 stoppers are plugged into the pre-filled syringes precisely after vacuum hold cycle. Now last cycle of nitrogen flushing with vacuum break completes the Stoppering operation.

AUTOMATIC ROTARY BOTTLE WASHING MACHINE

MODEL NO.:- CPRBW
AUTOMATIC ROTARY BOTTLE WASHING MACHINE
Geneva Washing










OPERATION:
The bottles are loaded on the subsequent indexing part of rotating platform and are cleared in series of operations. Specially designed bottle holders are provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water and sequence of various washing media to suit specific requirement.

LIQUID MANUFACTURING PLANT

LIQUID MANUFACTURING PLANT : GMP Model

LIQUID MANUFACTURING PLANT consist the following equipments and accessories.

Manufacturing Vessel
Melting Vessel
Storage Vessel
Filter Press
Control Panel
Piping of Complete Plant
Working Platform
Transfer Pump
In-Line Homogenizer